Sensaphone ExpressThe Sensaphone Express monitors temperature and AC power, while including four dry contact inputs for additional sensors. It can be programmed to dial up to eight phone numbers if an alarm condition occurs, with a pre-recorded message in your own voice. SPEECH TECHNOLOGY With Express, Sensaphone, Inc. introduces digital speech recording to its family of industrial/ environmental monitors. This unique feature of Express allows you to record your own voice for the dial-out alarm messages. This means that when Express calls you during an alarm, you will receive your personalized voice message describing exactly what the alarm condition is. Now, instead of hearing a generic alarm message such as “Alarm message: Alarm 8 activated,” you can hear: “The computer room is flooding! Water level has exceeded one inch.” You can record a separate message for each of the four inputs plus an ID message that identifies the specific Express unit calling you. You can record voice messages locally with the built-in microphone on the Express, or remotely by telephone. The voice messages are stored in non-volatile memory so that, in the event of a power failure, there is no loss of information. MONITORING CAPACITY Express monitors up to four dry contacts. These can be configured as either normally open or normally closed. The alarm disabling feature allows you to enable or disable the alarm capabilities of any input. Express also monitors power failure with its built-in power-out detection. Sensaphone Express has a built-in temperature sensor with a 20 ft. cable, and can monitor either in degrees Fahrenheit or degrees Celsius. Front panel LEDs indicate to on-site personnel the status of each input (ALARM/OK) for additional on-site warning. Other LEDs indicate the power alarm status, battery condition, and phone status. Express’s built-in microphone allows you to call in and listen to noises at the remote site. RELIABILITY Express is equipped with a 12-hour Gel Cell rechargeable backup battery to ensure continued monitoring through power failures. Micro-controller operation is insured by two watchdog circuits. Dry contact inputs are optically isolated. Non-volatile memory for voice and programming storage also prevents loss. PROGRAMMABILITY Express’s voice-guidance makes programming easy. Parameters such as the temperature limits, alarm recognition time, intercall delay, rings until answer, power-out to alarm time, password, message repetitions, phone numbers and voice recording can be easily programmed via the local keypad. Alarm messages can even be changed remotely. A user-defined 4-digit password prevents access to the information. Programming is stored in non-volatile memory to prevent loss of data during power failure or storage. ALARM NOTIFICATION When an alarm condition occurs, Express automatically dials up to eight 32-digit phone numbers. Express recites the user-recorded ID message followed by the recorded alarm message. Express monitors call progress to detect busy signals or no answers. These features ensure that the the alarm message gets to the right people without wasted time. Alarm dial-out stops when Express is acknowledged. Alarms can be acknowledged by either pressing touch tones on your phone or by calling your Express unit back. Even when there is no alarm situation, you can keep track of your monitored conditions. You can call Express from any telephone to obtain a comprehensive status report on all conditions monitored by the system. Express also has a built-in microphone so you can listen in to sounds at the site. You can also review and change alarm messages. |
Email at: btgrowersupply@centurytel.net Copyright©2010 All Rights Reserved
|